Call

Eurovator

Food-grade stainless steel goods lift.

Eurovator™ provides a safe method of moving hygiene-critical bulk materials between floors

Overview

Eurovator is a food-grade stainless steel goods lift from Simpro, which provides a safe method of moving hygiene-critical bulk materials between floors or production levels.

With full 304-grade steel construction and IP66-rated componentry, the Eurovator is designed for operation in food production environments, and can withstand regular washdowns with harsh cleaning chemicals. The accessible design permits rapid sterilisation, and a certified electronic interlock system ensures personnel safety when cleaning internal spaces such as the elevator shaft.

Like all Simpro products, the Eurovator features a very flexible design. Access stations can be fitted to the front and/or rear of the machine at any level up to ten metres. Various standard models are available with capacities of up to 600kg and car sizes up to 1500mm x 1500mm. And because the elevator needs no floor pit or other building alterations, installation typically takes less than 60 minutes and does not require a building consent. This minimises production downtime and makes the Eurovator very cost-effective.

The Eurovator can transform your hygiene-critical production workflow – minimising contamination hazards, driving productivity up, and workplace injuries down.

Eurovator is a removable appliance which does not form part of the structure of the building. In most jurisdictions, the installation of such appliances does not require local authority consent.

Eurovator complies with AS1735.4 and NZS4332, and uses Cat3 architecture to achieve Safety Performance Level ‘d’ as defined by ISO13849 and AS/NZS4024, but is not certified to carry personnel or livestock.

Features

Features of the Eurovator from Simpro

Options and Accessories

Specifications and Technical Data

Eurovator specifications vary depending on weight capacity, car size and maximum floor-to-floor lift height. Enter the parameters you require below, and the correct specifications will be displayed:

Eurovator Specifications
Model EV250JG3000Z
Weight capacity 250kg
Car size (internal dimensions) 1000mm wide x 700mm deep x 1200mm high (options: custom car size)
Lift height (floor-to-floor) 3000mm
Access stations 2x access stations in ‘Z’ flow configuration (options: multiple access stations in ‘Z’, ‘C’, ‘E’, ‘F’, ‘I’ or custom flow configurations)
Height (overall) 4500mm
Width (overall) 1460mm
Length (overall, door closed) 900mm
Length (overall, door open) 2100mm
Weight (overall) ~480kg
Travel speed ~0.3m/s
Travel duration ~10 seconds
Electrical specifications (1-Phase) 1-phase mains supply (120/240VAC 50-60hz, max draw 8 Amps), with Variable Speed Drive (VSD) controller driving 0.75kW AC electric motor, and 24VDC control circuit
Electrical specifications (3-Phase) 3-phase mains supply (400VAC 50-60hz, max draw 1.9 Amps), with 0.75kW AC electric motor, and 24VDC control circuit
User Interface Operator panel at each access station with: AutoRaise/Unlock button, AutoLower/Unlock button, Reset button, Emergency Stop button, Overload Warning light (options: custom control configurations)
Ingress Protection IP66 (options: IP69K)
Noise level at operator’s ear ⪅ 60dB(A)
Materials 304-grade stainless steel construction, with polished finish (options: 316-grade stainless steel for acidic environments)
Access doors 2x left-hinge access doors 1400mm wide x 1200mm high, stainless steel framed with transparent PET-G panels (options: right-hinge, swing-up or roll-up access doors)
Door safety interlocks Dual solenoid-operated safety interlocks fitted to each access door, rated to ISO13849-1 (AS/NZS4024) Cat3/PLd or Cat4/PLe
Mounting 4x bolt-down lugs (options: 4x ⌀100mm blue non-marking Resilex castors)
Applicable standards and certifications AS1735.4, NZS4332, ISO 13849-1, AS/NZS4024, IEC 62061, AS/NZS3000, Conformité Européene (CE), EN 349 1993, EN 574 1996+A1:200, EN 953 1997, EN ISO 4413 2010, EN ISO 12100 2010, EN ISO13849-1 2006, EN ISO 13857 2008, EN 60204 2006+A1 2009, EN61000-6-2 2005, EN61000-6-4 2007, Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/EC

Resources and Downloads

Full full product support, user guides and spare parts please visit the Simpro Support Centre.