Cost-effective materials handling elevator.
Hylifta is a cost-effective materials handling elevator from Simpro, designed to provide a fast, safe and reliable method of transferring bulk goods or product batches across production levels.
Based on tried and tested Dumpmaster technology, Hylifta was designed for flexibility from the start. The electronic management system allows access stations to be fitted to the front and/or rear of the lift, at any level up to ten metres. Various models are available with safe working loads of up to 600kg, and car sizes up to 1500mm x 1500mm.
Because the Hylifta can be fitted with wheels and needs no floor pit or other building alterations, installation typically take as little as 60 minutes and does not require a building consent. This minimises production downtime and makes the lift very cost-effective.
Like all Simpro products, Hylifta is designed to be maintenance-free and extremely reliable. It can transform your production workflow, saving valuable time and effort while reducing workplace injuries.
From design phase to installation the process was made pretty simple by the guys at Simpro. Even a problem with the PLC in the first weeks of use was sorted out over the phone with a few photographs which I thought pretty professional.
The elevator has proved a huge asset to our process.
Matthew De Nobrega - Maintenance Engineer - Clariant (New Zealand) Ltd
Options and Accessories
- Rated load capacities of 250kg or 600kg
- Single-phase or three-phase power supply
- Platform sizes up to 1500mm x 1500mm
- Left-hinge, right-hinge, swing-up or roll-up access doors
- Custom maximum load heights
- Castor wheels for easy movement
- Certification to international safety standards including ISO13849 and AS/NZS4024 Cat3/Cat4/PLd
- Full or partial stainless steel construction
- Custom operational logic via digital e-management system
- Digital scales (not trade certified)
- Trolleys, carts and bins to suit
- Ground-level access with minimum clearance
- Site signage, staff inductions and training
Specifications and Technical Data
Hylifta specifications vary depending on weight capacity, car size and maximum floor-to-floor lift height. Enter the parameters you require below, and the correct specifications will be displayed:
|Car size (internal dimensions)||1000mm wide x 700mm deep x 1200mm high (options: custom car size)|
|Lift height (floor-to-floor)||3000mm|
|Access stations||2x access stations in ‘Z’ flow configuration (options: multiple access stations in ‘Z’, ‘C’, ‘E’, ‘F’, ‘I’ or custom flow configurations)|
|Length (overall, door closed)||900mm|
|Length (overall, door open)||2100mm|
|Travel duration||~10 seconds|
|Electrical specifications (1-Phase)||1-phase mains supply (120/240VAC 50-60hz, max draw 8 Amps), with Variable Speed Drive (VSD) controller driving 0.75kW AC electric motor, and 24VDC control circuit|
|Electrical specifications (3-Phase)||3-phase mains supply (400VAC 50-60hz, max draw 1.9 Amps), with 0.75kW AC electric motor, and 24VDC control circuit|
|User Interface||Operator panel at each access station with: AutoRaise/Unlock button, AutoLower/Unlock button, Reset button, Emergency Stop button, Overload Warning light (options: custom control configurations)|
|Ingress Protection||IP55 (options: IP56, IP66, IP69K)|
|Guarding||1.6mm powdercoated sheet metal panels, double-layer lining to interior and exterior of frame (options: single-layer lining to exterior of frame only)|
|Corrosion protection||Hot-dip galvanised frame and pre-galvanised, powdercoated guarding and car (options: full or partial stainless steel)|
|Access doors||2x left-hinge access doors 1400mm wide x 1200mm high, steel framed with transparent PET-G panel (options: right-hinge, swing-up or roll-up access doors)|
|Door safety interlocks||Dual solenoid-operated safety interlocks fitted to each access door, rated to AS/NZS4024 Cat3/PLd|
|Mounting||4x bolt-down lugs (options: 4x ⌀100mm blue non-marking Resilex castors)|
|Applicable standards and certifications||AS/NZS4024, AS/NZS3000, ISO 13849-1, IEC 62061, Conformité Européene (CE), EN 349 1993, EN 574 1996+A1:200, EN 953 1997, EN ISO 4413 2010, EN ISO 12100 2010, EN ISO13849-1 2006, EN ISO 13857 2008, EN 60204 2006+A1 2009, EN61000-6-2 2005, EN61000-6-4 2007, Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/EC|